From: Ralph (Mandela@myrealbox.com)
Date: Wed Oct 12 2005 - 12:06:58 GMT-3
This is the beauty of Groupstudy! sharing such very useful information with each other. The ALT tip is simply great! Thanks Paresh.
As an extension, it can also be used to collect backbone routes for the script from the show up route output
Regards and best wishes to all
Ralph.
-----Original Message-----ply
From: "Paresh Khatri" <Paresh.Khatri@aapt.com.au>
To: ccielab@groupstudy.com
Date: Wed, 12 Oct 2005 11:40:52 +1000
Subject: RE: TCL Script to Ping.
Chris,
One way to eliminate the notepad step is to press the Alt key when selecting the column of addresses from the 'show ip alias' output (Alt allows you to make a column-wise selection and seems to work with most telnet clients). You can paste that straight in to the script then...
Paresh.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chris Lewis
Sent: Wednesday, 12 October 2005 11:28 AM
To: Robert Hosford; cciein2006@yahoo.com; ccielab@groupstudy.com
Subject: RE: TCL Script to Ping.
foreach i {
aadr 1
aadr 2
addr 3
} {ping $i}
Works every time for me. You can cut and paste the output from the show ip alias command on each router to get your list of addresses to ping and paste from notepad in to each router (use the find and replace to eliminate the interface column on each line to quickly get it in to a format that can be pasted in to the script). If anyone knows of a quicker and more efficient way to ping all addresses from all routers, I'd love to hear it.
Chris
Robert Hosford <rhosford@certifiednets.com> wrote:
Well from the looks of those scripts your not kidding about making it too
hard. If you can bang out that script 20 times flawlessly don't even try it
on the lab.
And be prepared if your TCL script doesn't work. On the first lab attempt I
tried with a TCl script it didn't work and I had to back away and do it by
hand. Just so you know CTRL + INS and SHIFT + INS work with secure crt.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
cciein2006@yahoo.com
Sent: Tuesday, October 11, 2005 11:07 AM
To: ccielab@groupstudy.com
Subject: Re: TCL Script to Ping.
I'm not sure about using these scripts during the exam. I have a feeling I
would spend more time troubleshooting the TCL script than the routing
protocols.
Just my $.002
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3