Re: The default value in port-security ?

From: Shanky (shankyz@gmail.com)
Date: Mon Oct 10 2005 - 04:54:21 GMT-3

• Next message: bi.s: "Re: NMC - CHECKiT Bundle"
• Previous message: Kevin: "The default value in port-security ?"
• Maybe in reply to: Kevin: "The default value in port-security ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Kevin,
 Default is 1, see here for more info..
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225sec/3550scg/sw
trafc.htm#wp1111801

 On 10/10/05, Kevin <trung@vnsystem.net> wrote:
>
> Hi Group,
>
> In the CCNP 3: Multilayer Switching book (ISBN 1-58713-143-9) page 607,
> Wayner
> Lewis stated that the switchport port-security maximum-number-of-addresses
> command is used to set the maximum munber of secure MAC address for the
> interface. The range is 1 to 128 and the default is 128 .
>
> Well, i did show port-security on both cat2950 & 3550, and the default is
> always 1.
>
> So what's the point ? Is this a mistake from Cisco book or there's
> something
> else that i didn't notice.
>
>
>
> Thanks.
>
>
>
> Kevin
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: bi.s: "Re: NMC - CHECKiT Bundle"
• Previous message: Kevin: "The default value in port-security ?"
• Maybe in reply to: Kevin: "The default value in port-security ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3