NTP Master default stratum

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sat Oct 08 2005 - 17:28:31 GMT-3

• Next message: simon hart: "RE: rate-limit vs. police"
• Previous message: Bajo: "Re: Menu command"
• Next in thread: Luis Rueda: "RE: NTP Master default stratum"
• Maybe reply: Luis Rueda: "RE: NTP Master default stratum"
• Maybe reply: Victor Cappuccio: "Re: NTP Master default stratum"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello All,

In Doc Cd
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/fun_r/cfr_1g05.htm

We can find the command ntp master [stratum]

And here says that by default, the master clock function is disabled.
When enabled, the default stratum is 8.
Ok lets test that..

Router#show run | in ntp master
ntp master

But cheeking in a router it says another thing.
Router#show ntp asso de
127.127.7.1 configured, our_master, sane, valid, **stratum 7 default
value **

Clarifications are welcome, and also if you can point me a good link
where I can find visual references between NTP Server / Master / Peers
/ Broacast please

Thanks
Victor

• Next message: simon hart: "RE: rate-limit vs. police"
• Previous message: Bajo: "Re: Menu command"
• Next in thread: Luis Rueda: "RE: NTP Master default stratum"
• Maybe reply: Luis Rueda: "RE: NTP Master default stratum"
• Maybe reply: Victor Cappuccio: "Re: NTP Master default stratum"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3