From: amir cohen (avi_patish@yahoo.com)
Date: Fri Oct 07 2005 - 08:16:31 GMT-3
Simon,
Thanx for the response:
here is a snaphot from debug rigrp:
Mar 1 01:05:35:
IP-EIGRP(Default-IP-Routing-Table:100): Int
150.1.2.0/24 M 4294967295 - 1657856 4294967295 SM
4294967295 - 1657856 4294967295
*Mar 1 01:05:35:
IP-EIGRP(Default-IP-Routing-Table:100): Int
130.1.26.0/24 M 4294967295 - 1657856
the above nets recieved from R3, but not injected into
the eigrp topology nor the routing table:
==============================================
SHOW IP EIGRP TPOLOGY:
R4#sh ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(130.1.234.4)
Codes: P - Passive, A - Active, U - Update, Q - Query,
R - Reply,
r - reply Status, s - sia Status
P 130.1.234.0/24, 1 successors, FD is 2169856
via Connected, Serial0/0.234
P 130.1.3.0/24, 1 successors, FD is 2195456
via 130.1.234.3 (2195456/281600),
Serial0/0.234
P 130.1.5.0/24, 1 successors, FD is 2218752
via 130.1.234.3 (2218752/1706752),
Serial0/0.234
P 130.1.8.0/24, 1 successors, FD is 2218752
via 130.1.124.1 (2218752/1706752),
Serial0/0.124
P 130.1.17.0/24, 1 successors, FD is 2218752
via 130.1.124.1 (2218752/1706752),
Serial0/0.124
P 150.1.3.0/24, 1 successors, FD is 2297856
via 130.1.234.3 (2297856/128256),
Serial0/0.234
P 150.1.1.0/24, 1 successors, FD is 2297856
via 130.1.124.1 (2297856/128256),
Serial0/0.124
P 150.1.7.7/32, 1 successors, FD is 2218752
via 130.1.124.1 (2218752/1706752),
Serial0/0.124
P 150.1.8.8/32, 1 successors, FD is 2218752
via 130.1.124.1 (2218752/1706752),
Serial0/0.124
Codes: P - Passive, A - Active, U - Update, Q - Query,
R - Reply,
r - reply Status, s - sia Status
P 130.1.35.0/24, 1 successors, FD is 2218752
via 130.1.234.3 (2218752/1706752),
Serial0/0.234
P 130.1.33.0/24, 1 successors, FD is 2218752
via 130.1.234.3 (2218752/1706752),
Serial0/0.234
P 130.1.45.5/32, 1 successors, FD is 2218752
via 130.1.234.3 (2218752/1706752),
Serial0/0.234
P 204.12.1.0/24, 1 successors, FD is 2218752
via 130.1.124.1 (2218752/1706752),
Serial0/0.124
P 192.10.1.0/24, 1 successors, FD is 2218752
via 130.1.234.3 (2218752/1706752),
Serial0/0.234
P 130.1.78.0/24, 1 successors, FD is 2218752
via 130.1.124.1 (2218752/1706752),
Serial0/0.124
P 130.1.124.0/24, 1 successors, FD is 2169856
via Connected, Serial0/0.124
========================================
--- simon hart <simon@harttel.com> wrote:
> Amir,
>
> the best place to start is the show eigrp topology
> command
>
> Here you will see your feasibile successors etc.
>
> Perhaps you could post this output to the group
>
> Simon
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> amir cohen
> Sent: 07 October 2005 11:21
> To: ccielab@groupstudy.com
> Subject: Eigrp question
>
>
> Guys,
>
> first of all i am sorry for the long message:-)
> I am not able to understand a certain topology in
> EIGRP:
>
> I have 4 routers R1,R2,R3,R4 connected via frame
> realy
> cloud.
>
> R1 is the hub of R2 and R4
> R3 is the Hub of R2 and R4
>
> R2,R4 has 2 sub interfaces for each HUB
> R1,R3 connected via physical
>
> split horizion is disabled both R1 and R3 by default
>
> my problem is:
>
> R4 is recieving the networks updates of R2 from R3(2
> networks, loopback+ ethernet),
> But for unknown reason it wont get in into the
> routing
> table, WHY???????
>
> i have activated all kind of debugs, including debug
> all, but no message about it,
>
>
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 2005
> http://mail.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3