From: Javier Tomé (fjtm@tid.es)
Date: Fri Oct 07 2005 - 08:26:39 GMT-3
Something to test just in case...
I barely remember a similar problem (just with external eigrp routes)
when the eigrp router id was duplicated (same eigrp router-id on two
routers) because a misconfigured "eigrp router-id" command...
amir cohen wrote:
>Simon,
>
>Thanx for the response:
>
>here is a snaphot from debug rigrp:
>
>Mar 1 01:05:35:
>IP-EIGRP(Default-IP-Routing-Table:100): Int
>150.1.2.0/24 M 4294967295 - 1657856 4294967295 SM
>4294967295 - 1657856 4294967295
>*Mar 1 01:05:35:
>IP-EIGRP(Default-IP-Routing-Table:100): Int
>130.1.26.0/24 M 4294967295 - 1657856
>
>the above nets recieved from R3, but not injected into
>the eigrp topology nor the routing table:
>==============================================
>SHOW IP EIGRP TPOLOGY:
>
>R4#sh ip eigrp topology
>IP-EIGRP Topology Table for AS(100)/ID(130.1.234.4)
>
>Codes: P - Passive, A - Active, U - Update, Q - Query,
>R - Reply,
> r - reply Status, s - sia Status
>
>P 130.1.234.0/24, 1 successors, FD is 2169856
> via Connected, Serial0/0.234
>P 130.1.3.0/24, 1 successors, FD is 2195456
> via 130.1.234.3 (2195456/281600),
>Serial0/0.234
>P 130.1.5.0/24, 1 successors, FD is 2218752
> via 130.1.234.3 (2218752/1706752),
>Serial0/0.234
>P 130.1.8.0/24, 1 successors, FD is 2218752
> via 130.1.124.1 (2218752/1706752),
>Serial0/0.124
>P 130.1.17.0/24, 1 successors, FD is 2218752
> via 130.1.124.1 (2218752/1706752),
>Serial0/0.124
>P 150.1.3.0/24, 1 successors, FD is 2297856
> via 130.1.234.3 (2297856/128256),
>Serial0/0.234
>P 150.1.1.0/24, 1 successors, FD is 2297856
> via 130.1.124.1 (2297856/128256),
>Serial0/0.124
>P 150.1.7.7/32, 1 successors, FD is 2218752
> via 130.1.124.1 (2218752/1706752),
>Serial0/0.124
>P 150.1.8.8/32, 1 successors, FD is 2218752
> via 130.1.124.1 (2218752/1706752),
>Serial0/0.124
>
>Codes: P - Passive, A - Active, U - Update, Q - Query,
>R - Reply,
> r - reply Status, s - sia Status
>
>P 130.1.35.0/24, 1 successors, FD is 2218752
> via 130.1.234.3 (2218752/1706752),
>Serial0/0.234
>P 130.1.33.0/24, 1 successors, FD is 2218752
> via 130.1.234.3 (2218752/1706752),
>Serial0/0.234
>P 130.1.45.5/32, 1 successors, FD is 2218752
> via 130.1.234.3 (2218752/1706752),
>Serial0/0.234
>P 204.12.1.0/24, 1 successors, FD is 2218752
> via 130.1.124.1 (2218752/1706752),
>Serial0/0.124
>P 192.10.1.0/24, 1 successors, FD is 2218752
> via 130.1.234.3 (2218752/1706752),
>Serial0/0.234
>P 130.1.78.0/24, 1 successors, FD is 2218752
> via 130.1.124.1 (2218752/1706752),
>Serial0/0.124
>P 130.1.124.0/24, 1 successors, FD is 2169856
> via Connected, Serial0/0.124
>
>========================================
>
>
>--- simon hart <simon@harttel.com> wrote:
>
>
>
>>Amir,
>>
>>the best place to start is the show eigrp topology
>>command
>>
>>Here you will see your feasibile successors etc.
>>
>>Perhaps you could post this output to the group
>>
>>Simon
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com
>>[mailto:nobody@groupstudy.com]On Behalf Of
>>amir cohen
>>Sent: 07 October 2005 11:21
>>To: ccielab@groupstudy.com
>>Subject: Eigrp question
>>
>>
>>Guys,
>>
>>first of all i am sorry for the long message:-)
>>I am not able to understand a certain topology in
>>EIGRP:
>>
>>I have 4 routers R1,R2,R3,R4 connected via frame
>>realy
>>cloud.
>>
>>R1 is the hub of R2 and R4
>>R3 is the Hub of R2 and R4
>>
>>R2,R4 has 2 sub interfaces for each HUB
>>R1,R3 connected via physical
>>
>>split horizion is disabled both R1 and R3 by default
>>
>>my problem is:
>>
>>R4 is recieving the networks updates of R2 from R3(2
>>networks, loopback+ ethernet),
>>But for unknown reason it wont get in into the
>>routing
>>table, WHY???????
>>
>>i have activated all kind of debugs, including debug
>>all, but no message about it,
>>
>>
>>
>>
>>
>>__________________________________
>>Yahoo! Mail - PC Magazine Editors' Choice 2005
>>http://mail.yahoo.com
>>
>>
>>
>>
>_______________________________________________________________________
>
>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>--
>>No virus found in this incoming message.
>>Checked by AVG Anti-Virus.
>>Version: 7.0.344 / Virus Database: 267.11.13/123 -
>>Release Date: 06/10/2005
>>
>>--
>>No virus found in this outgoing message.
>>Checked by AVG Anti-Virus.
>>Version: 7.0.344 / Virus Database: 267.11.13/123 -
>>Release Date: 06/10/2005
>>
>>
>>
>>
>_______________________________________________________________________
>
>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>
>
>
>
>__________________________________
>Yahoo! Mail - PC Magazine Editors' Choice 2005
>http://mail.yahoo.com
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3