From: James Ventre (messageboard@ventrefamily.com)
Date: Tue Oct 04 2005 - 09:23:06 GMT-3
6509E> sh port capa 2
Model WS-X6724-SFP
Port 2/1
Type 1000BaseSX
Auto MDIX yes
AuxiliaryVlan no
Broadcast suppression percentage(0-100)
Channel yes
COPS port group 2/1-24
CoS rewrite yes
Dot1q-all-tagged yes
Dot1x yes
Duplex full
Fast start yes
Flow control receive-(off,on,desired),send-(off,on,desired)
Inline power no
Jumbo frames yes
Link debounce timer yes
Link debounce timer delay yes
Membership static,dynamic
Port ASIC group 2/1-12
Port Security ACL yes
Port VLAN Mapping Group: 2/1-12 Maximum Allowed Mappings: 128
QOS scheduling rx-(1q8t),tx-(1p3q8t)
Security yes
SPAN source,destination
Speed 1000
Sync restart delay no
ToS rewrite DSCP
Trunk encap type 802.1Q,ISL
Trunk mode on,off,desirable,auto,nonegotiate
UDLD yes
James
Hoogen wrote:
> Hi All,
> Does any one have WS-6724-SFP module working on their 6500 cisco switches.
> I need a *show interfaces capabilities* output of it to judge the egress
> queuing capabilities. Any suggestions regarding the queuing capabilities? I
> am gettting dscp packets on the trunk link and trusting them but somehow i
> believe i have to change them into COS packets before applying any queuing
> mechanisms like wrr or wred.
> TIA
> Hoogen
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3