problems with 1751-v

From: Vishal Patel (vpatel@accessproviders.com.au)
Date: Tue Oct 04 2005 - 03:23:46 GMT-3

• Next message: Victor Cappuccio: "Shape Average - Peak"
• Previous message: Henk de Tombe: "RE: Trouble with multicast over NBMA"
• Next in thread: Guyler, Rik: "RE: problems with 1751-v"
• Maybe reply: Guyler, Rik: "RE: problems with 1751-v"
• Maybe reply: Vishal Patel: "RE: problems with 1751-v"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all ,

I have a problem with 1751-V router

VWIC-1MFT-E1 is not being detected.

The same VWIC works fine in 2800.

I can see that in "sh diag" command on 1751.

But the controller doesn't appear in config.

I have used following ios

1) c1700-ipvoicek9-mz.124-3.bin

2) c1700-ipvoice-mz.123-11.T7.bin

3) c1700-sv3y-mz.123-16.bin

I have also tried all the possible slots on 1751..but it gives same
following error

%E1T1_MODULE-3-INITFAILURE:

and cisco website ..tells nothing more then contacting the tech support.

Kindly let me know if anyone has troubles hooted such problem, I feel the
hardware is fine because it works in 2800.

Thanks

Vishal

• Next message: Victor Cappuccio: "Shape Average - Peak"
• Previous message: Henk de Tombe: "RE: Trouble with multicast over NBMA"
• Next in thread: Guyler, Rik: "RE: problems with 1751-v"
• Maybe reply: Guyler, Rik: "RE: problems with 1751-v"
• Maybe reply: Vishal Patel: "RE: problems with 1751-v"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3