From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Oct 02 2005 - 01:10:42 GMT-3
Hola Mani,
The First Question
All Input Traffic from that Interface will be policed, because there is
no acl configured in the last rate-limit cmd.
For The second One..
http://www.cse.ohio-state.edu/cgi-bin/rfc/rfc2328.html
And http://www.cisco.com/warp/public/104/9.html#qone
if the *ip ospf network point-to-point* command is configured under
loopbacks, OSPF advertises the loopback subnet as the actual subnet
configured on loopbacks.
HTH
Victor.
mani poopal wrote:
>Hi Group,
>
>I have a small question regarding rate-limit command and ospf. Pls look at the following commands from cisco url.
>QUESTION1:
>=================================================================
>interface Hssi0/0/0
> description 45Mbps to R2
> rate-limit input access-group 101 20000000 24000 32000 conform-action
> set-prec-transmit 5 exceed-action set-prec-transmit 0
> rate-limit input access-group 102 10000000 24000 32000 conform-action
> set-prec-transmit 5 exceed-action drop
> rate-limit input 8000000 16000 24000 conform-action set-prec-transmit 5 exceed-action
> drop
>================================================================
>Now the last line is for any remaining traffic, instead of limiting remaining traffic, if I want to allow all the remaining traffic, what commands I need instead of the last line "rate-limit input 8000000 16000 24000 confrom-action set-prec-transmit 5 exceed-action drop or do I need any command.
>
>QUESTION2:
>In ospf what other methods are available to make ospf loopback appear as 24bit routes(assume mask of 24) other than using ip ospf network type to point to point or redistribute connected.)
>
>
>thanks
>
>Mani
>
>
>
>
>
>
>---------------------------------
>Yahoo! for Good
> Click here to donate to the Hurricane Katrina relief effort.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3