From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Sep 27 2005 - 16:12:01 GMT-3
You could also change the escape character under the VTY lines.
IE-AS(config)#line vty 0 4
IE-AS(config-line)#escape-character ?
BREAK Cause escape on BREAK
CHAR or <0-255> Escape character or its ASCII decimal equivalent
DEFAULT Use default escape character
NONE Disable escape entirely
soft Set the soft escape character for this line
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Private Ryan
Sent: Tuesday, September 27, 2005 7:34 AM
To: Cisco certification
Subject: execute a command after user login
Hi Group,
I want to change the escape character automatically after login
username ccie nohangup password cisco
username ccie autocommand terminal escape-character Z
But the above configuration doesn't work.
if I don't add "nohangup" command, the command prompt will quit after
sucessful login
How can I accomplish it? because I don't want to type this command
whenever I login. Thanks !
Ryan
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3