snmp

From: Jens Petter Eikeland (jenseike@start.no)
Date: Sun Sep 25 2005 - 05:03:55 GMT-3

• Next message: Javier Tomé: "Re: Prefix-list Question.."
• Previous message: simon hart: "RE: multicast rate-limit"
• Next in thread: Tim: "RE: snmp"
• Maybe reply: Tim: "RE: snmp"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Can anybody please tell me what the difference with using snmp v2 and snmp
v3 when it comes to authentication with the snmp-server. I am trying to
set up snmp traps from my router, and want to use strongest authentication
possible. Also I know that snmp traps are sent on udp port 162, but do I
also

Need to enable udp port 161 in my acl's for this to reach the server. Do I
need to think about anything specially by configuring v3 versus version 2

This is how I have configured this :

snmp-server community cisco RO 10

snmp-server enable traps

snmp-server host 10.10.44.114 version 3 auth cisco

snmp-server contact admin@cisco.com

snmp-server location San Jose

access-list 10 permit host 10.10.44.114

Will this give me the best possible security?

Thanks

Jens

• Next message: Javier Tomé: "Re: Prefix-list Question.."
• Previous message: simon hart: "RE: multicast rate-limit"
• Next in thread: Tim: "RE: snmp"
• Maybe reply: Tim: "RE: snmp"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3