OSPF redistribute connected issue

From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Sat Sep 24 2005 - 16:09:15 GMT-3


Group -

Here is an issue that I am having under OSPF....

R2 is connected R5 through a pt-pt frame. R2 is the ABR, which has the area 0
connection. The connection to R5 and R5 in in area 1. I have a number of
loopbacks set up on R5 (50.50.x.0)....and, when I redistribute into OSPF, I
can see them at R2 in the ospf database, but they are not showing up in the
routing table. And, because of this, the loopbacks are not reachable at the
spokes (other links out on the network connected to R2). Any thoughts on this
one?

R2 config.....

interface Serial0
 no ip address
 encapsulation frame-relay
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
!
interface Serial0.1 multipoint
 ip address 192.168.3.2 255.255.255.0
 ip ospf priority 255
 frame-relay map ip 192.168.3.2 203
 frame-relay map ip 192.168.3.3 203 broadcast
 frame-relay map ip 192.168.3.4 204 broadcast
 no frame-relay inverse-arp
!
interface Serial0.2 point-to-point
 ip address 192.168.5.2 255.255.255.0
 ip ospf hello-interval 30
 frame-relay interface-dlci 205
!
router ospf 1
 log-adjacency-changes
 network 192.168.3.0 0.0.0.255 area 0
 network 192.168.5.0 0.0.0.255 area 1
 neighbor 192.168.3.4
 neighbor 192.168.3.3

On R5 the config is.....

interface Loopback0
 ip address 50.50.50.5 255.255.255.0
!
interface Loopback10
 ip address 50.50.60.5 255.255.255.0
!
interface Loopback11
 ip address 50.50.61.5 255.255.255.0
!
interface Loopback12
 ip address 50.50.62.5 255.255.255.0
!
interface Loopback13
 ip address 50.50.63.5 255.255.255.0
!
interface Loopback14
 ip address 50.50.64.5 255.255.255.0
!
interface Loopback15
 ip address 50.50.65.5 255.255.255.0
!
interface Loopback16
 ip address 50.50.66.5 255.255.255.0
!
interface Loopback17
 ip address 50.50.67.5 255.255.255.0
!
interface Loopback18
 ip address 50.50.68.5 255.255.255.0
!
interface Serial0
 ip address 192.168.5.5 255.255.255.0
 encapsulation frame-relay
 frame-relay map ip 192.168.5.2 502 broadcast
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
!
router ospf 1
 router-id 50.50.50.5
 log-adjacency-changes
 redistribute connected metric 20 metric-type 1 subnets
 network 192.168.5.0 0.0.0.255 area 1

Dave



This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3