From: James Ventre (messageboard@ventrefamily.com)
Date: Fri Sep 23 2005 - 09:15:54 GMT-3
It creates another span session - rather than one that may already exist.
The syntax for this command has changed for new CatOS devices - you now
specify them by session numbers:
asHEOC1> (enable) set span 1 4/5 ?
both Both receiving and transmitting traffic
filter Apply filter to vlan
inpkts Enable/disable destination port incoming
packets
learning Enable/disable MAC address learning
multicast Enable/disable multicast traffic
rx Receiving traffic
session Session Number for Span Session
tx Transmitting traffic
<cr>
James
D.Tropiano@sirtisistemi.it wrote:
Hi group,
could someone tell me the meaning of the option " create " in the
following command:
set span {src_mod/src_ports | src_vlans | sc0} {dest_mod/dest_port} [rx |
tx | both] [inpkts
{enable | disable}] [learning {enable | disable}] [multicast {enable |
disable}]
[filter vlans...] [create]
In the CCO there is a very cryptic explanation:.
Thanks in advance
_______________________________________________________________________
Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3