set span command

From: D.Tropiano@sirtisistemi.it
Date: Fri Sep 23 2005 - 09:09:42 GMT-3

• Next message: James Ventre: "Re: set span command"
• Previous message: Leigh Harrison: "I bombed out at Brussles yesterday!"
• Next in thread: James Ventre: "Re: set span command"
• Maybe reply: James Ventre: "Re: set span command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi group,

could someone tell me the meaning of the option " create " in the
following command:

set span {src_mod/src_ports | src_vlans | sc0} {dest_mod/dest_port} [rx |
tx | both] [inpkts
{enable | disable}] [learning {enable | disable}] [multicast {enable |
disable}]
[filter vlans...] [create]

In the CCO there is a very cryptic explanation:.

Thanks in advance

• Next message: James Ventre: "Re: set span command"
• Previous message: Leigh Harrison: "I bombed out at Brussles yesterday!"
• Next in thread: James Ventre: "Re: set span command"
• Maybe reply: James Ventre: "Re: set span command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3