From: Dergez Bertalan (dergez@omikron.hu)
Date: Sun Sep 18 2005 - 20:26:13 GMT-3
Anis Faruqui wrote:
> Hi Group,
> Please forgive me for my english and drawing.:)
>
>Yesterday night I did one lab from Solie-I LAB-25 chapter 12 OSPF *OSPF
>Multiple Area Routing, Route Redistribution and
>
>SummarizationPart I,
>
>figure I am simulating it here ,
>OSPFAS-2001-A-0---R1-EIGRP AS-2001-R2---EIGRP-2001-int lo0
>10.1.16.1/24<http://10.1.16.1/24>
> R2-int lo1 10.1.17.1/24 <http://10.1.17.1/24>
>
>R2-int lo2 10.1.18.1/24 <http://10.1.18.1/24>
>
>LAB Objective :-
>
>configure summary route to advertise all the 3 routes for the int
>lo0,lo1,lo2 as one route into OSPF or Aggregate as one route into OSPF
>Network from router R2 .
>*
>
>To achieve my Goal I have 2 Ways
>
>1) To summarise these routes from router R2 by giving this command on the
>interface mode* IP summary-address eigrp 2001 10.1.16.0 <http://10.1.16.0>
>255.255.255.252 <http://255.255.255.252> *and advertise it to R1 as summary
>route 10.1.16.0 <http://10.1.16.0> NM-255.255.252.0
>
>2) To summarise the routes on R1 router in the router OSPF config mode by
>giving the command *summary-address 10.1.16.0 <http://10.1.16.0>
>255.255.255.252 <http://255.255.255.252>
>
>
Beside the technical reasons they didn't summarize in eigrp because it's
ospf and igrp in the book :)
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3