From: FCO.JAVIER TOME MORAN (fjtm@tid.es)
Date: Sun Sep 18 2005 - 15:00:15 GMT-3
Hi Henad,
I am not really sure, but I think that you missed the direction of the
filtering clause. "Out" direction is for prefixes leaving the Area,
and "In" direccion is for prefixes entering the Area.
Please, try and tell us about the result...
Javi
----- Mensaje original -----
De: nenad pudar <nenad.pudar@gmail.com>
Fecha: Domingo, Septiembre 18, 2005 6:40 pm
Asunto: OSPF ABR Type 3 LSA Filtering
> Problem with OSPF ABR Type 3 LSA Filtering
>
> OSPF ABR Type 3 LSA Filtering is supposed to be supported from
> 12.2(4) T.
> I can configure it but I do not see that it works
> I am trying to filter all IA routes from ABR in area 66
>
> RTA-R1#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(11)T11, RELEASE
> SOFTWARE(fc1)
>
> router ospf 1
> router-id 1.1.1.1 <http://1.1.1.1>
> log-adjacency-changes
> area 0 authentication message-digest
> area 66 filter-list prefix AREA_66_OUT out
> network 10.50.2.2 <http://10.50.2.2> 0.0.0.0 <http://0.0.0.0> area 0
> network 10.100.2.1 <http://10.100.2.1> 0.0.0.0 <http://0.0.0.0>
> area 111
> network 172.16.35.66 <http://172.16.35.66> 0.0.0.0
> <http://0.0.0.0> area 0
> network 172.16.66.6 <http://172.16.66.6> 0.0.0.0 <http://0.0.0.0>
> area 66
> !
>
> !
> ip prefix-list AREA_66_OUT seq 5 deny 0.0.0.0/0 <http://0.0.0.0/0>
> le 32
>
> However I still see all IA routes on the other end (router in area 66)
>
> Is there anything wrong in this config or I am missing something
> here ?
>
> thanks
> nenad
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3