From: Tim (ccie2be@nyc.rr.com)
Date: Thu Sep 15 2005 - 07:25:08 GMT-3
Hey guys,
Can a sub-interface, for example, fa0/1.1, be created on a switchport?
I've never tried it but I can't see why that wouldn't be possible.
I'd test it myself if I had a 3550 handy but I don't.
TIA, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mark
Forest
Sent: Thursday, September 15, 2005 12:10 AM
To: 'Schulz, Dave'; ccielab@groupstudy.com
Subject: RE: Creating a sub-interface on a Fa1/0 port
Dave,
I have found that if you are in interface config mode then back out to
global config mode then enter int fa1/0.x, this should work out for you.
mf
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Wednesday, September 14, 2005 6:36 PM
To: ccielab@groupstudy.com
Subject: Creating a sub-interface on a Fa1/0 port
I am working on a lab and having a problem creating a subinterface in a
router (it won't let me enter "int fa1/0.1", for some reason). This allows
it on other routers. In order to create a trunk. Is there certain router
specifics that would prevent this. I am starting from a clean router.
Thanks for any help.
Dave
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3