From: Jens Petter Eikeland (jenseike@start.no)
Date: Tue Sep 13 2005 - 17:12:29 GMT-3
Hi,
I think the reason there is nobody telling you this is that this is not
something that makes sense to do. If you try understand what the two
different QoS technics are doing you will be able to see that for your
selfe. As several others also has said to this post earier is that this is
something that is not you would do. You know that you will learn a hell of a
llot more by finding out how technologis are working by your selfe rater
than somebody telling you this. Anyway, you have got so many hints from
bright people here on this forum regarding this, so you should be able to
figure this out.. This QoS technologies are not similar, and work in
different ways.
Happy studying..
Jens Petter Eikeland
-----Opprinnelig melding-----
Fra: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Pe vegne av Stefan
Grey
Sendt: 12. september 2005 07:36
Til: jenseike@start.no; ccielab@groupstudy.com
Emne: RE: SV: Qos question (bandwidth,police).
Hi,
Thank you very much for your reply and for the link. But there is explained
just how the police and bandwidth commands are used separetely but not
together. I just need to find the difference between:
1.
policy-map LIMIT
class web
police 100000 conform-action transmit exceed action drop.
and
2.
policy-map LIMIT
class web
bandwidth 100
police 100000 conform-action transmit exceed action drop.
Could anybody tell something?? Because I don't see any. As I think during
the congestions both configs don't let traffic to be more than 100 M and
when there is no congestion there are no limiting in both case. Thanks.
>From: "Jens Petter Eikeland" <jenseike@start.no>
>Reply-To: "Jens Petter Eikeland" <jenseike@start.no>
>To: "'Stefan Grey'" <examplebrain@hotmail.com>, <ccielab@groupstudy.com>
>Subject: SV: Qos question (bandwidth,police).
>Date: Sun, 11 Sep 2005 23:28:21 +0200
>
>Hi ,
>
>I am sure you will get a better understanding of this two technologies by
>reading findings yourselfe
>
>Here is a some good documents covering both technologies very vel
>
>http://www.cisco.com/en/US/tech/tk543/tk545/tech_design_guides_list.html
>
>Answer to your question is to use the policing command and conform it to
>100
>meg as in your example
>
>Jens Petter
>
>
>
>-----Opprinnelig melding-----
>Fra: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Pe vegne av
>Stefan
>Grey
>Sendt: 11. september 2005 23:02
>Til: ccielab@groupstudy.com
>Emne: Qos question (bandwidth,police).
>
>It is needed to limit the input of some WEB traffic to 100 Megabyte.
>
>I saw such config in the book:
>policy-map LIMIT
>class web
>bandwidth 100
>police 100000 conform-action transmit exceed action drop.
>
>Whe could the bandwidth here be used. Whey to command are used together
>here.
>
>As I know police is really limiting traffic to 100 Mb. But bandwidth is for
>custom queuing.
>Could anybody comment this configuration???? What would be the difference
>between this config with or without bandwidth command.
>
>Thanks.
>
>_________________________________________________________________
>MSN Search Ireland has launched - test-drive it today! http://search.msn.ie
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3