From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Sep 11 2005 - 17:21:30 GMT-3
Mohamed,
Don't take this the wrong way but you'll learn far more by just
doing tasks like this over relying on someone's answer. You just need
one router and about 10 minutes to lab both of these up.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mohammed El-Komy (moelkomy)
Sent: Sunday, September 11, 2005 12:47 PM
To: ccielab@groupstudy.com
Subject: limiting the inactivity period under vty lines
Guys,
1- If I need for example to limit the telnet user to be disconnected
after 5 minutes of inactivity, shall I use
Line vty 0 4
Exec-timeout 5
or
Line vty 0 4
Session-timeout 5
Is there a difference or do both of them fulfill the task?
2- If I need a banner message to be displayed to telnet users that says
"Access to Network is prohibited", shall I use
Banner login "...."
Or
Banner motd "...."
Which of them is more accurate in such a case?
Regards,
-------------------------------------------------------------------
Mohamed ElKomy
Cisco Systems, Systems Engineer
Office: +2024885300
GSM: +20121022297
FAX: +2024885400
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3