What is difference about "distribute-list out" and route-map ?

From: Private Ryan (private_ryan2k1@yahoo.com)
Date: Wed Sep 07 2005 - 13:34:29 GMT-3

• Next message: A Molica: "RE: route feedback"
• Previous message: Alvarez, Rolando [NCSUS]: "RE: eigrp timer!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi

In the beloew example, I think I can use route-map to
filter the route in redistribution. What is the
advantage of using "distribute-list out" ?

interface serial 0
ip add 130.10.62.1 255.255.255.0
!
interface serial 1
ip add 130.10.63.1 255.255.255.0
!
interface ethernet 0
ip add 130.10.8.1 255.255.255.0
!
interface tokenring 0
ip add 130.10.9.1 255.255.255.0
!
router rip
default-metric 10
network 130.10.0.0
passive-interface serial 0
passive-interface serial 1
redistribute ospf 109
distribute-list 10 out ospf 109
!
router ospf 109
network 130.10.62.0 0.0.0.255 area 0
network 130.10.63.0 0.0.0.255 area 0
redistribute rip subnets
distribute-list 11 out rip
!
access-list 10 deny 130.10.8.0 0.0.7.255
access-list 10 permit 0.0.0.0 255.255.255.255
access-list 11 permit 130.10.8.0 0.0.7.255
access-list 11 deny 0.0.0.0 255.255.255.255

• Next message: A Molica: "RE: route feedback"
• Previous message: Alvarez, Rolando [NCSUS]: "RE: eigrp timer!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3