From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Mon Sep 05 2005 - 13:18:01 GMT-3
You have to setup your variables in rommon mode first (they are static).
Once the variables are set then issue the "tftpdnld" command to start the
copy process. Here's the output from one of my 2610's booting an XM image
successfully:
rommon 2 > set
PS1=rommon ! >
IP_ADDRESS=10.20.49.44
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=10.20.49.1
TFTP_SERVER=10.20.49.40
TFTP_CHECKSUM=0
TFTP_FILE=c2600-js-mz.122-15.T16.bin
BSI=0
rommon 3 >
Rik
-----Original Message-----
From: loc.pham@comcast.net [mailto:loc.pham@comcast.net]
Sent: Sunday, September 04, 2005 10:07 AM
To: Elliott Reyes; ccielab@groupstudy.com
Subject: Re: 2600XM Software on regular 2600
Hello Elliott,
I assume you will do it on a 262x : you need 32F/64D and a 12.1(3r)2T
BootROM.
Then follow this link:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186
a008015bf9e.shtml
I have try it on 261x : never get it to work.
HTH,
lP
> How is it that you run a XM image on a regular 2600.
>
>
>
> I tried by loading image from the TFTP Server.
>
>
>
>
>
>
>
>
>
>
>
> Elliott
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3