From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Sep 05 2005 - 16:50:22 GMT-3
Make sure you add the -r flag, i.e. "tftpdnld -r"
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Guyler, Rik
> Sent: Monday, September 05, 2005 11:18 AM
> To: ccielab@groupstudy.com
> Subject: RE: 2600XM Software on regular 2600
>
> You have to setup your variables in rommon mode first (they are
static).
> Once the variables are set then issue the "tftpdnld" command to start
the
> copy process. Here's the output from one of my 2610's booting an XM
image
> successfully:
>
> rommon 2 > set
> PS1=rommon ! >
> IP_ADDRESS=10.20.49.44
> IP_SUBNET_MASK=255.255.255.0
> DEFAULT_GATEWAY=10.20.49.1
> TFTP_SERVER=10.20.49.40
> TFTP_CHECKSUM=0
> TFTP_FILE=c2600-js-mz.122-15.T16.bin
> BSI=0
> rommon 3 >
>
>
> Rik
>
> -----Original Message-----
> From: loc.pham@comcast.net [mailto:loc.pham@comcast.net]
> Sent: Sunday, September 04, 2005 10:07 AM
> To: Elliott Reyes; ccielab@groupstudy.com
> Subject: Re: 2600XM Software on regular 2600
>
> Hello Elliott,
> I assume you will do it on a 262x : you need 32F/64D and a
12.1(3r)2T
> BootROM.
> Then follow this link:
>
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note0
91
> 86
> a008015bf9e.shtml
>
> I have try it on 261x : never get it to work.
> HTH,
> lP
>
>
> > How is it that you run a XM image on a regular 2600.
> >
> >
> >
> > I tried by loading image from the TFTP Server.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Elliott
> >
> >
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3