From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Sep 01 2005 - 12:30:03 GMT-3
No you can't. Just like in OSPF IS-IS prefers intra-area (L1)
routes over inter-area (L2) routes. You cannot change this behavior in
OSPF or IS-IS regardless of metric or distance, short of poisoning the
route.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of Zb
> Sent: Wednesday, August 31, 2005 8:42 AM
> To: ccielab@groupstudy.com
> Subject: prefer ISIS L2 route over L1 in same area
>
> Hi Group,
>
> Assume that 2 Routers connected by two interface.
> Each router run ISIS in same area, and one interface is only L2
circuit,
> other is only L1 circuit.
>
> In this case, ISIS prefer L1 route over L2 route.
>
> Can I prefer L2 route over L1 route in same area ?
>
> I tried to change the L2 metric lower than L1, but not worked.
>
> Any ideas ?
>
>
> best regards,
>
> Zb
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:13 GMT-3