From: kumara.shunmugam@wipro.com
Date: Mon Aug 29 2005 - 04:27:31 GMT-3
No.. It is not that both the commands will match the source of the updates.
Match IP route-source
Use the match ip route-source command to create an entry in a route map to test routes based on whether the route has been advertised by specific routers at the addresses specified in ACL.
Match IP next hop:
Use the match ip next-hop command to create an entry in a route map to test routes based on a next-hop router address specified in the access lists.
Both the Matching is applied in route-maps that affect outbound routes only.Useful for redistribution purposes some times
Shun
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mohammed El-Komy (moelkomy)
Sent: Saturday, August 27, 2005 12:57 PM
To: ccielab@groupstudy.com
Subject: match ip next-hop and match ip route-source
Guys,
Both commands match on the source of updates, so what's the difference?
And if you could plz clarify with an example.
Regards,
-------------------------------------------------------------------
Mohamed ElKomy
Cisco Systems, Systems Engineer
Office: +2024885300
GSM: +20121022297
FAX: +2024885400
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3