From: Leigh Harrison (leigh.harrison@azzu.co.uk)
Date: Sat Aug 13 2005 - 12:58:41 GMT-3
All,
If I have the subnet 10.1.n.n - 10.50.n.n and I wanted to filter even
routes out of one interface and odd routes out of a different one, how
would I achieve this?
I know that all I would need to do is match on the 16th bit and ensure
that it is a "1" or a "0" in order to make it odd or even. I know that
I could write a big list, but I would like to match on the one bit. Is
this even possible ?!
Many thanks in advance,
LH
Leigh Harrison
Technical Consultant
Azzurri Communications
Castleton Mill,
Castleton Close,
Leeds,
LS12 2DS
Email: Leigh.Harrison@azzu.co.uk <mailto:Leigh.Harrison@azzu.co.uk>
Mobile: 07989 605 806
Office: 0870 410 5868
Fax: 0870 410 0003
Web: www.azzu.co.uk <http://www.azzu.co.uk/>
"Any opinions expressed in this mail are those of the individual and not
necessarily the company. This e-mail and any files transmitted with it
are confidential and solely for the use of the intended recipient. If
you are not the intended recipient or the person responsible for
delivering it to the intended recipient, please be advised that you have
received this email in error and that any use is strictly prohibited.
Please either notify a member of Azzurri Communications Leeds' Internal
IT support by telephone +44 (0)870 4442838 or by replying to this mail
and advising accordingly. Thank you for your co-operation"
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3