From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Sat Aug 13 2005 - 02:15:07 GMT-3
sorry,
wrong capture :)
this one is when I didn't use ppp multilink.
same question asked.
Thanks.
Rgds,
Thomwin
R4#show int dialer 1
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Interface is unnumbered. Using address of Loopback0 (150.1.4.4)
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 1 seconds on reset
Interface is bound to BR0/0:1
Last input 00:04:42, output never, output hang never
Last clearing of "show interface" counters 01:05:49
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/2/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 42 kilobits/sec
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
4868 packets input, 464661 bytes
6539 packets output, 544478 bytes
Bound to:
BRI0/0:1 is up, line protocol is up
Hardware is PQUICC BRI with U interface
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 3/255, rxload 3/255
Encapsulation PPP, LCP Open
Open: CDPCP, IPCP, loopback not set idle 00:01:48
Interface is bound to Di1 (Encapsulation PPP)
Last input 00:00:07, output 00:00:11, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 1000 bits/sec, 1 packets/sec
3533 packets input, 299538 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3950 packets output, 286544 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
13 carrier transitions
Thomwin Chen <thomwin_chen@yahoo.com> wrote:
Hi All,
I was observing ISDN.
during the observation, I noticed that when I use Dialer interface and didn't use multilink ppp, the input/output rate for Dialer interface always 0 even after I passed heavy traffic on it.
but when I use multilink ppp, the input/output rate for Dialer interface will show up.
is this normal ?
anyone know why ?
Thanks.
Rgds,
Thomwin
R4#show int dialer 1
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Interface is unnumbered. Using address of Loopback0 (150.1.4.4)
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open, multilink Open
Open: CDPCP, IPCP, loopback not set
DTR is pulsed for 1 seconds on reset idle 00:01:52
Interface is bound to BR0/0:1
Last input 00:00:07, output never, output hang never
Last clearing of "show interface" counters 00:17:31
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/2/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 48 kilobits/sec
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
2787 packets input, 261775 bytes
3610 packets output, 301040 bytes
Bound to:
BRI0/0:1 is up, line protocol is up
Hardware is PQUICC BRI with U interface
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open, multilink Open, loopback not set
Interface is bound to Di1 (Encapsulation PPP)
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
1568 packets input, 145097 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
1457 packets output, 101137 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
7 carrier transitions
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3