From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Aug 02 2005 - 12:16:15 GMT-3
IPv4 access-lists do not affect IPv6 traffic since they are
different protocol stacks. If it did that would be like an IPX SAP
access-list affecting IP traffic. Now if you are *tunneling* IPv6
inside IPv4 that is a different story. You may need to permit either
GRE or IPv6IP.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> gladston@br.ibm.com
> Sent: Tuesday, August 02, 2005 8:13 AM
> To: ccielab@groupstudy.com
> Subject: IPv4 Security...add IPv6
>
> Imagine the task says to configure security on R5, so only R2 can
telnet
> to it.
> The candidate configure access-list to allow only R2 IP address IN.
>
> Then, another task says to configure IPv6 on R5...
>
> (If I was a Proctor I would make a question like that :) )
>
>
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3