From: John Matus (john_matus@hotmail.com)
Date: Thu Jul 28 2005 - 17:26:52 GMT-3
they all fail to connect.
>From: "Brian Dennis" <bdennis@internetworkexpert.com>
>To: "John Matus" <john_matus@hotmail.com>,<ccielab@groupstudy.com>
>Subject: RE: 2511 terminal server woes
>Date: Thu, 28 Jul 2005 16:12:13 -0400
>
>John,
> Did you try and test every line (9-16)?
>
>Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>bdennis@internetworkexpert.com
>
>Internetwork Expert, Inc.
>http://www.InternetworkExpert.com
>Toll Free: 877-224-8987
>Direct: 775-745-6404 (Outside the US and Canada)
>
>
>-----Original Message-----
>From: John Matus [mailto:john_matus@hotmail.com]
>Sent: Thursday, July 28, 2005 12:39 PM
>To: Brian Dennis; ccielab@groupstudy.com
>Subject: RE: 2511 terminal server woes
>
>here is the running config and the sh line 1 16.
>
>Terminal># sh line 1 16
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
>
>Int
> 1 TTY 9600/9600 - inout - - - 4 0 0/0
>
>-
> 2 TTY 9600/9600 - inout - - - 1 0 0/0
>
>-
> 3 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 4 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 5 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 6 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 7 TTY 9600/9600 - inout - - - 1 0 0/0
>
>-
> 8 TTY 9600/9600 - inout - - - 1 0 0/0
>
>-
> 9 TTY 9600/9600 - inout - - - 4 0 0/0
>
>-
> 10 TTY 9600/9600 - inout - - - 2 0 0/0
>
>-
> 11 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 12 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 13 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 14 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 15 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
> 16 TTY 9600/9600 - inout - - - 0 0 0/0
>
>-
>
>
>Terminal>#sh run
>Building configuration...
>
>Current configuration : 1461 bytes
>!
>version 12.2
>service timestamps debug datetime msec
>service timestamps log datetime msec
>no service password-encryption
>!
>hostname Terminal>
>!
>logging queue-limit 100
>enable secret 5 $1$Rkh1$gOFBTEytcjnPL.uXWsIre1
>enable password disco
>!
>ip subnet-zero
>no ip routing
>ip host r1 2001 1.1.1.1
>ip host r2 2002 1.1.1.1
>ip host r3 2003 1.1.1.1
>ip host r4 2004 1.1.1.1
>ip host r5 2005 1.1.1.1
>ip host r6 2006 1.1.1.1
>ip host bb1 2007 1.1.1.1
>ip host bb2 2008 1.1.1.1
>ip host bb3 2009 1.1.1.1
>ip host sw1 2010 1.1.1.1
>ip host sw2 2011 1.1.1.1
>ip host frame 2012 1.1.1.1
>!
>!
>!
>!
>interface Loopback0
>ip address 1.1.1.1 255.255.255.255
>!
>interface Ethernet0
>ip address 10.51.16.18 255.255.254.0
>no ip route-cache
>no ip mroute-cache
>!
>interface Serial0
>no ip address
>no ip route-cache
>no ip mroute-cache
>shutdown
>no fair-queue
>!
>interface Serial1
>no ip address
>no ip route-cache
>no ip mroute-cache
>shutdown
>!
>no ip http server
>no ip classless
>!
>!
>!
>!
>alias exec c conf t
>alias exec r1 telnet r1
>alias exec r2 telnet r2
>alias exec r3 telnet r3
>alias exec r4 telnet r4
>alias exec r5 telnet r5
>alias exec r6 telnet r6
>alias exec sw1 telnet sw1
>alias exec sw2 telnet sw2
>alias exec bb1 telnet bb1
>alias exec bb2 telnet bb2
>alias exec bb3 telnet bb3
>alias exec frame telnet frame
>!
>line con 0
>transport output none
>line 1 16
>exec-timeout 5 0
>flush-at-activation
>modem InOut
>no exec
>transport input all
>line aux 0
>line vty 0 4
>password cisco
>login
>!
>end
>
>
>
>
> >From: "Brian Dennis" <bdennis@internetworkexpert.com>
> >To: "John Matus" <john_matus@hotmail.com>,<ccielab@groupstudy.com>
> >Subject: RE: 2511 terminal server woes
> >Date: Thu, 28 Jul 2005 15:19:13 -0400
> >
> >John,
> > The "open" is just saying that the telnet session is connected.
> >Why don't you just post your whole configuration here along with the
> >output of the "show line 1 16" command.
> >
> >Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> >bdennis@internetworkexpert.com
> >
> >Internetwork Expert, Inc.
> >http://www.InternetworkExpert.com
> >Toll Free: 877-224-8987
> >Direct: 775-745-6404 (Outside the US and Canada)
> >
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >John Matus
> >Sent: Thursday, July 28, 2005 12:07 PM
> >To: ccielab@groupstudy.com
> >Subject: 2511 terminal server woes
> >
> >ok,
> >i had a bad cable on this 2511 for ports 9-16 <it has 1 port for 1-8
>and
> >
> >another for 9-16 that use the octal cables>. i replaced the cable but
> >still am unable to establish a reverse telnet session throught ports
> >9-16
> >when i telnet in i get a status of "open" but i don't seem to interface
> >w/
> >the router....i just get a blank screen and nothing when i hit enter a
> >few
> >times. would a bad async port still show connections as being "open"?
> >it
> >seems like the port is bad but perhaps i'm doing something wrong. any
> >suggestions?
> >
> >TIA
> >
> >_________________________________________________________________
> >Is your PC infected? Get a FREE online computer virus scan from McAfee.
> >Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>_________________________________________________________________
>Don't just search. Find. Check out the new MSN Search!
>http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3