From: Gustavo Novais (gustavo.novais@novabase.pt)
Date: Sun Jul 24 2005 - 16:52:14 GMT-3
Hi,
Doing some tests on which I need to have a virtual template over ATM
with ipv6 and ipv4 traffic. With Ipv4, everything ok, but with Ipv6 I
can't seem to put the ipv6 address on the virtual access built by the
virtual template... Is there any trick I haven't found yet?
The Configs are the following -
R6
interface ATM1/0
no ip address
no atm ilmi-keepalive
!
interface ATM1/0.69 point-to-point
pvc 0/32
ubr+ 3000 128
oam-pvc manage 3
encapsulation aal5snap
protocol ppp Virtual-Template1
!
!
interface Virtual-Template1
ip address 172.16.56.5 255.255.255.252
ip ospf authentication
ip ospf authentication-key ipexpert
ipv6 address 2002:DEAD::69:6/120
!
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3