From: Dillon Yang (dillony@gmail.com)
Date: Sat Jul 16 2005 - 13:55:37 GMT-3
Hi, Scott:
Thanks, the "dialer string" command may be the best choice for one spid on PPP multilink, I guess.
I will lab it.
TIA'
dillon
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'John Matus'" <jmatus@pacbell.net>; "'Dillon Yang'" <dillony@gmail.com>; "'Group Study'" <ccielab@groupstudy.com>
Sent: Saturday, July 16, 2005 11:26 PM
Subject: RE: ONLY one SPID on PPP multilink
> Yes and no.
>
> It will all depend on your ISDN switch configuration. SPIDs are a
> technically arbitrary thing anyway just as a reference point.
>
> Your ability to place two phone calls to the same number or not will depend
> on whether the switch is capable of supporting that. In order to bring up a
> second B channel, the second phone call must be placed. Bonding multiple
> channels is a PPP function, not an ISDN function. So there is no D-channel
> message or command to simply bring up the second line.
>
> Watch the 'debug isdn q931' output and observe a completely separate phone
> call. If the switch supports multiple calls, it may work to the same
> initial phone number as the first call. If not, there will be a pause and
> you'll need a second dialer map to complete the second call. You would see
> "user busy" in the debug output if this is the case.
>
> HTH,
>
> Scott
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
> Matus
> Sent: Friday, July 15, 2005 11:04 PM
> To: Dillon Yang; Group Study
> Subject: Re: ONLY one SPID on PPP multilink
>
> dillon,
> when talking about 1 (one) isdn circuit you are by definition talking about
> (2) b channels. you don't need to do anything else except for setting a
> multilink and a load threshold. the second spid (i would hazard a guess)
> would apply to the second bri interface that would have 2 more b channels.
> there is a difference between placing another call and bringing up a second
> b-channel.
>
>
> Regards,
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
> ----- Original Message -----
> From: "Dillon Yang" <dillony@gmail.com>
> To: "Group Study" <ccielab@groupstudy.com>
> Sent: Friday, July 15, 2005 7:50 PM
> Subject: ONLY one SPID on PPP multilink
>
>
> > Hi, group:
> >
> > Generally, we can map two numbers to a destination IP to make the second
> > channel, but how can we initiate the seconde channel with ONLY one SPID
> > set in the ISDN simulation already?
> >
> >
> > [two SPIDs]
> > !
> > interface BRI0/0
> > ip address 172.16.12.1 255.255.255.0
> > encapsulation ppp
> > ip ospf demand-circuit
> > dialer idle-timeout 60
> > dialer map ip 172.16.12.2 name R2 broadcast 1001018
> > dialer map ip 172.16.12.2 name R2 broadcast 1001019
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 77710010160101 1001016
> > isdn spid2 77710010170101 1001017
> > no peer neighbor-route
> > ppp authentication chap callout
> > !
> >
> > [ONE SPIDs]
> > ???
> >
> > TIA
> > dillon
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3