From: Dillon Yang (dillony@gmail.com)
Date: Fri Jul 15 2005 - 23:50:32 GMT-3
Hi, group:
Generally, we can map two numbers to a destination IP to make the second channel, but how can we initiate the seconde channel with ONLY one SPID set in the ISDN simulation already?
[two SPIDs]
!
interface BRI0/0
ip address 172.16.12.1 255.255.255.0
encapsulation ppp
ip ospf demand-circuit
dialer idle-timeout 60
dialer map ip 172.16.12.2 name R2 broadcast 1001018
dialer map ip 172.16.12.2 name R2 broadcast 1001019
dialer-group 1
isdn switch-type basic-ni
isdn spid1 77710010160101 1001016
isdn spid2 77710010170101 1001017
no peer neighbor-route
ppp authentication chap callout
!
[ONE SPIDs]
???
TIA
dillon
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3