From: jellyboy (jellyboy@gmail.com)
Date: Fri Jul 15 2005 - 07:04:35 GMT-3
Hi, I have a number of questions regarding Back-to-Back FR. Two
routers R1 and R3 connected together with no FR switch in between.
R3 config
frame-relay switching
!
interface Serial0/1
no ip address
encapsulation frame-relay
clockrate 56000
frame-relay intf-type dce
!
interface Serial0/1.31 point-to-point
des to r1 circuit
ip address 172.16.31.2 255.255.255.252
frame-relay interface-dlci 31<<must be same on both sides
R1 config
interface Serial0/3.31 point-to-point
des to r3 circuit
ip address 172.16.31.1 255.255.255.252
frame-relay interface-dlci 31<<must be same on both sides
Question- why do the dlci values have to be the same value on both sides?
Question- does anyone know of any other configs that would achieve the
same result?
Just curious, as usual!
Cheers,
jellyboy
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3