From: Godswill Oletu (oletu@inbox.lv)
Date: Tue Jul 12 2005 - 12:19:28 GMT-3
Amit,
Remember that, in OSPF, Distribute-list out works on the ASBR to filter
redistributed routes into other protocols. Distribute-list in works on any
router to prevent routes from being put in the routing table, but it does
not prevent link-state packets from being propagated, downstream routers
would still have the routes.
--- Godswill Oletu----- Original Message ----- From: "Amit Jain" <netsteps@rediffmail.com> To: "Group Study" <ccielab@groupstudy.com> Sent: Tuesday, July 12, 2005 6:33 AM Subject: Distribute-list in OSPF
> Hi Group > > When I am applying a distribute-list in OSPF its giving an error : > > Rack4R1(config-router)#distribute-list 50 out s0/0 > % Interface not allowed with OUT for OSPF > > Or > > Rack4R1(config-router)#distribute-list prefix R2 out s0/0 > % Interface not allowed with OUT in case of OSPF > > My s0/0 is a frame relay physcal interface with ip ospf network type > point-to-multipoint non-broadcast defined. Inverse arp is disabled on > interface. > IOS on the router is 12.2(15)T7 > > > Has anybody seen this problem before? > > Thanks > Amit jain > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3