From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jul 11 2005 - 01:37:57 GMT-3
Brian,
The initial configuration for R6 should have the IP address
assigned to the ATM interface. See if your initial configuration
doesn't include the IP address under the ATM interface. If not login to
the member's site and download the latest version of the initial
configurations.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Lee
Sent: Sunday, July 10, 2005 8:17 PM
To: Cisco certification
Subject: IEWB -> ATM
Hi Brian (s),
Lab 17 IEWBv1, task 3 (ATM) requires making the pvc 0/51 on R6.
R6 should be able to ping BB1's ip address 54.1.3.254.
The solution is:
!
interface atm 0/0/0
pvc 0/51
broadcast
!
I don't have atm sw to test it. However i don't think you can ping the
BB1
without ip add configured on atm interface.
Thanks
B.L
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3