From: Sila Moni (silamoni@yahoo.com)
Date: Fri Jul 08 2005 - 22:54:56 GMT-3
Please check out the following URLs:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftabrt3f.htm
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftoadsup.htm
--- "ccie2004@excite.com" <ccie2004@excite.com> wrote:
> Hi All, Is it possible to filter specific LSA's
> from being flooded to other areas. I have read that
> Type-3's can be filtered but how about Type 5 LSA's.
> Say I have a redistributed route into OSPF which
> will show up as LSA-5 and I want it flooded to every
> other area except area 1. Is that possible without
> using stub areas or some other variants of the stub
> feature. I was thinking that it can be filtered from
> the routing table by using distribute lists but than
> that would have to be done on every router in the
> area? Am I right? Thx for the help.
>
> _______________________________________________
> Join Excite! - http://www.excite.com
> The most personalized portal on the Web!
>
>
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3