From: Amit Jain (netsteps@rediffmail.com)
Date: Mon Jul 04 2005 - 13:55:10 GMT-3
Configure "pvc 0/5 qsaal" and "pvc 0/16 ilmi" and look for "sh atm
ilmi-status"
Hope this helps
Amit Jain
----- Original Message -----
From: "Adam S. Roth" <adam@therothfamily.net>
To: <ccielab@groupstudy.com>
Sent: Monday, July 04, 2005 9:37 PM
Subject: Determine NSAP Address
> Hello Group:
>
>
> In the past I basically been a "lurker". I am going to take a more
> active role so I will probably asking a lot of questions. My first
question
> is How do you determine the NSAP address for the ATM router interface if
you
> don't have it from the ATM switch?
>
>
> Thanks for all your help
>
>
> Adam
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3