From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Sun Jul 03 2005 - 06:16:14 GMT-3
Dave,
The dialer-list is not necessary for dialer watch to work. But suppose you
want to test ISDN connectivity every month to make sure that the backup will
work when needed, then you need a dialer-list allowing PING for example. It
is true that Cisco in his examples always include a dialer-list allowing
everything except the routing protocol.
-- Richard
-----Original Message-----
From: Schulz, Dave [mailto:DSchulz@dpsciences.com]
Sent: Sunday, July 03, 2005 8:53 AM
To: ccielab@groupstudy.com
Subject: Dialer Watch and Dialer Profiles
2 questions:
1. Is it possible to use dialer watch within dialer profiles? The only
examples on the Doc CD show them under the interface. And, if this is
possible, how do you map it to the specific watch list route?
2. If Dialer watch uses a route (read: absense of a route) to bring up the
call....then why is it necessary to have a dialer-list/dialer-group for
interesting traffic, since the route controls whether the ISDN link comes up
or not. Just trying to think like the router.
TIA...for any help on this one.
Dave
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3