From: John Matus (jmatus@pacbell.net)
Date: Fri Jul 01 2005 - 02:59:45 GMT-3
shanky,
no it does not go to rommon.
the error on the router is something to the effect "unable to contact
1.1.1.1 will try again in 30 seconds".......and then after 3 attempts it
just boots up normally, but w/ an erased config
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Shanky" <shankyz@gmail.com>
To: "John Matus" <jmatus@pacbell.net>
Cc: "Ed Lui" <edwlui@gmail.com>; "John Matus" <john_matus@hotmail.com>;
<ccielab@groupstudy.com>
Sent: Thursday, June 30, 2005 10:56 PM
Subject: Re: 2500 problem loading IOS
Hi,
I am assuming that the router goes to ROMMON mode after it fails to
locate the TFTP Server.
Pls have a look at the links below ..
Check this out..
http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a0080110ed1.shtml
http://www.cisco.com/en/US/products/hw/iad/ps497/products_tech_note09186a0080110d2c.shtml
Hope it helps.
HTH
Shanky
On 7/1/05, John Matus <jmatus@pacbell.net> wrote:
> i'm using e0 on the same subnet as the tftp server.
>
>
> Regards,
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
> ----- Original Message -----
> From: "Ed Lui" <edwlui@gmail.com>
> To: "John Matus" <john_matus@hotmail.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Thursday, June 30, 2005 9:32 PM
> Subject: Re: 2500 problem loading IOS
>
>
> > It doesn't work if the tftp server is set up to be reached through the
> > serial interface.
> >
> > On 6/30/05, John Matus <john_matus@hotmail.com> wrote:
> >> my buddy here @ work has a 2500 w/ 16/16. i'm trying up upgrade to
> >> 12.2
> >> and
> >> am having some trouble w/ the tftp. after i do a copy tftp flash and
> >> specify the file it askes if i want to erase the config in flash...i
> >> say
> >> yes. it says "ok, dude - i must reboot"... then it reboots. when i
> >> comes
> >> back up it times out when trying to connect to the tftp server. i've
> >> tried
> >> pinging the router when it comes back up but it looks like it's loosing
> >> it's
> >> ip address during the reboot <yes, i saved the config>. does anyone
> >> have
> >> any suggestions on how to get this sucker up?
> >>
> >> TIA.
> >>
> >> _________________________________________________________________
> >> On the road to retirement? Check out MSN Life Events for advice on how
> >> to
> >> get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3