From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Wed Jun 29 2005 - 09:15:18 GMT-3
I don't know of a way to tag a frame on a Cisco switch without trunking but
are you sure the Enterasys switch is actually tagging the frames? If so and
it's not trunking with Dot1Q, you would still have to make sure the tagging
format is compatible with anything Cisco does.
Rik
-----Original Message-----
From: atolstykh@atfam.com [mailto:atolstykh@atfam.com]
Sent: Tuesday, June 28, 2005 10:00 PM
To: ccielab@groupstudy.com
Subject: Tag egress frames on the access port
I have some equipment plugged into the Enterasys switch and configuration of
the port on the switch is extremely simple:
Port is a member of vlan 33 tagged
Is it possible to tag egress frame on the access port in Cisco world without
configuring this port as a trunk?
Thanks,
Andrew
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:45 GMT-3