RE: Tag egress frames on the access port

From: atolstykh@atfam.com
Date: Wed Jun 29 2005 - 13:44:07 GMT-3

• Next message: gladston@br.ibm.com: "DHCP, IP helper and Security"
• Previous message: Montiean: "Re: MSDP and MBGP question"
• Maybe in reply to: atolstykh@atfam.com: "Tag egress frames on the access port"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Yes - it actually tags all frames when configured to do so, it uses
regular Dot1q vlan tags

So sounds like it is a trunk in Cisco world?

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Guyler, Rik
Sent: Wednesday, June 29, 2005 7:15 AM
To: 'ccielab@groupstudy.com'
Subject: RE: Tag egress frames on the access port

I don't know of a way to tag a frame on a Cisco switch without trunking
but
are you sure the Enterasys switch is actually tagging the frames? If so
and
it's not trunking with Dot1Q, you would still have to make sure the
tagging
format is compatible with anything Cisco does.

Rik

-----Original Message-----
From: atolstykh@atfam.com [mailto:atolstykh@atfam.com]
Sent: Tuesday, June 28, 2005 10:00 PM
To: ccielab@groupstudy.com
Subject: Tag egress frames on the access port

I have some equipment plugged into the Enterasys switch and
configuration of
the port on the switch is extremely simple:

Port is a member of vlan 33 tagged

Is it possible to tag egress frame on the access port in Cisco world
without
configuring this port as a trunk?

Thanks,

Andrew

• Next message: gladston@br.ibm.com: "DHCP, IP helper and Security"
• Previous message: Montiean: "Re: MSDP and MBGP question"
• Maybe in reply to: atolstykh@atfam.com: "Tag egress frames on the access port"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:45 GMT-3