From: Jacky Murphy (ccie@maitruongxua.com)
Date: Fri Jun 24 2005 - 00:41:06 GMT-3
Hi Tim,
tell me current register value (show version)
I think the bit disable break was set. (register eight bit, ex: 0x2002,
default is 0x2102)
if that is in the case, only one way to choise, you must open your router to
reset the register.
Jacky,
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Thursday, June 23, 2005 7:03 PM
Subject: Break key
> Hi guys,
>
> When using HyperTerminal, what's the break key?
>
> (I tried using the break key but that didn't work.)
>
> I want to get into rommon mode to change the register.
>
> TIA, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:43 GMT-3