From: ccie2be (ccie2be@nyc.rr.com)
Date: Mon Jun 20 2005 - 10:36:08 GMT-3
Does this help?
R3(config-if)#dampening ?
<1-30> Half-life time for the penalty
<cr>
R3(config-if)#dampening 30 ?
<1-20000> Value to start reusing an interface
<cr>
R3(config-if)#dampening 30 1000 ?
<1-20000> Value to start suppressing an interface
R3(config-if)#dampening 30 1000 2000 ?
<1-255> Maximum duration to suppress an interface
R3(config-if)#dampening 30 1000 2000 60 ?
restart Enable restart penalty
<cr>
R3(config-if)#dampening 30 1000 2000 60
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sheikh Rahman
Sent: Monday, June 20, 2005 9:21 AM
To: ccielab@groupstudy.com
Subject: dampening
HI
Is it possible with the interface dampening command to assign a penalty
value for a interface flap. For example I want interface to be in dampening
state after 5 flap.
Thanks
Haf
**********************************************************************
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
Although Dimension Data has taken reasonable precautions to ensure no
viruses are present in this email, the company cannot accept responsibility
for any loss or damage arising from the use of this email or attachments.
www.uk.didata.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:42 GMT-3