From: eldho paul (eldho_paul@sify.com)
Date: Wed Jun 15 2005 - 08:01:17 GMT-3
The snmp-server enable traps command is used in conjunction with the snmp-server host command. Use the snmp-server host command to specify which host or hosts receive SNMP notifications. In order to send notifications, you must configure at least one snmp-server host command.
For a host to receive a notification controlled by this command, both the snmp-server enable traps command and the snmp-server host command for that host must be enabled. If the notification type is not controlled by this command, just the appropriate snmp-server host command must be enabled.
The notification types used in this command all have an associated MIB object that allows them to be globally enabled or disabled. Not all of the notification types available in the snmp-server host command have notificationEnable MIB objects, so some of these cannot be controlled using the snmp-server enable command.
Regards,
Eldho.
> Group
I could not get the difference between:
"snmp-server host<br>136.7.2.100 CISCOTRAP"
and
"snmp-server host 136.7.2.100 traps<br>CISCOTRAP"
Logically they mean the same. Any help?
ALso if we have<br>configured :
"snmp-server host 136.7.2.100 traps CISCOTRAP vtp"
then<br>why do we need to specifically enable vtp traps again by:
"snmp-server<br>enable traps vtp"
Wont first command enable vtp for that<br>host??
Thanks
Amit<br>Jain
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3