From: thomas.rader@freesurf.ch
Date: Sun Jun 05 2005 - 04:08:36 GMT-3
Hello,
Thanks, default L1L2 is what I also thought.
But when I try to a simple config on a pod of three routers, it always tells me L2 when I do a "show clns is" (with no "is-type" defined on any of the three routers).
Shouldn't it show me L1L2 ?
Thanks, Thomas
-----Original Message-----
From: Wang Dehong-DWANG1 [mailto:Dehong.Wang@motorola.com]
Sent: Saturday, June 04, 2005 10:58 PM
To: 'thomas.rader@freesurf.ch'; ccielab@groupstudy.com
Subject: RE: ISIS questions
You should be able to see it using show cln is, and the default router type is L1L2 for the first router isis process you creat..
Rack1R3#sh cln is
System Id Interface State Type Priority Circuit Id Format
Rack1R1 Fa0/0 Up L2 64 Rack1R3.01 Phase V
Rack1R6 Fa0/0 Up L2 64 Rack1R3.01 Phase V
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of thomas.rader@freesurf.ch
Sent: Saturday, June 04, 2005 3:51 PM
To: ccielab@groupstudy.com
Subject: ISIS questions
Hello,
I've been playing with ISIS and have two ISIS related questions:
1) How do I see what Level router a ISIS router is a (Level-1, Level-2 or Level1-2) ?
This is important as they often tell you in labs to ensure that the router is only a Level-1 router, etc.
2) If I don't specify anything with the "is-type" statement, what Level router it be ?
Thanks, Thomas
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3