From: Church, Chuck (cchurch@netcogov.com)
Date: Fri Jun 03 2005 - 12:14:51 GMT-3
Server load balancing is more of a data-center type technology.
Supporting it on a 2600 router would make no sense, as it's not capable
of moving that much traffic. 3550 would be a maybe, but maybe it
requires EMI. Or it may not be supported either. Check the Feature
Navigator to be sure what platforms support it.
Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services - Design & Implementation Team
1210 N. Parker Rd.
Greenville, SC 29609
Home office: 864-335-9473
Cell: 703-819-3495
cchurch@netcogov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
thomas.rader@freesurf.ch
Sent: Friday, June 03, 2005 10:59 AM
To: ccielab@groupstudy.com
Subject: SLB
Help!
Does anyone know why I can't run SLB on my Cisco 2620XM routers or 3550
switches ?
2620XM:
R1(config)#ip slb
R1(config)#ip slb ?
% Unrecognized command
R1(config)#
R1#show flash:
System flash directory:
File Length Name/status
1 19297684
[19297748 bytes used, 13732396 available, 33030144 total]
32768K bytes of processor board System flash (Read/Write)
R1#
3550:
Switch1(config)#ip slb ?
% Unrecognized command
Switch1(config)#i
Switch1#show flash
Directory of flash:/
3 -rwx 2440 Mar 01 1993 03:44:15 +00:00 config.text
4 -rwx 916 Mar 01 1993 04:23:39 +00:00 vlan.dat
86 drwx 192 Mar 01 1993 00:08:05 +00:00
c3550-i5q3l2-mz.121-22.EA4
7 -rwx 69 Mar 01 1993 00:08:19 +00:00 system_env_vars
5 -rwx 5 Mar 01 1993 03:44:15 +00:00
private-config.text
6 -rwx 0 Mar 01 1993 00:08:19 +00:00 env_vars
15998976 bytes total (10226176 bytes free)
Switch1#
These devicees are running the kitchen & sink IOS versions (full
features) so surely I should be able to find this feature.
What am I doing wrong ?
Thanks, Thomas
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3