From: thomas.rader@freesurf.ch
Date: Fri Jun 03 2005 - 11:58:37 GMT-3
Help!
Does anyone know why I can't run SLB on my Cisco 2620XM routers or 3550 switches ?
2620XM:
R1(config)#ip slb
R1(config)#ip slb ?
% Unrecognized command
R1(config)#
R1#show flash:
System flash directory:
File Length Name/status
1 19297684
[19297748 bytes used, 13732396 available, 33030144 total]
32768K bytes of processor board System flash (Read/Write)
R1#
3550:
Switch1(config)#ip slb ?
% Unrecognized command
Switch1(config)#i
Switch1#show flash
Directory of flash:/
3 -rwx 2440 Mar 01 1993 03:44:15 +00:00 config.text
4 -rwx 916 Mar 01 1993 04:23:39 +00:00 vlan.dat
86 drwx 192 Mar 01 1993 00:08:05 +00:00 c3550-i5q3l2-mz.121-22.EA4
7 -rwx 69 Mar 01 1993 00:08:19 +00:00 system_env_vars
5 -rwx 5 Mar 01 1993 03:44:15 +00:00 private-config.text
6 -rwx 0 Mar 01 1993 00:08:19 +00:00 env_vars
15998976 bytes total (10226176 bytes free)
Switch1#
These devicees are running the kitchen & sink IOS versions (full features) so surely I should be able to find this feature.
What am I doing wrong ?
Thanks, Thomas
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3