Re: PBR problems - needs help

From: Firebat (terran_firebat2000@yahoo.com)
Date: Tue May 31 2005 - 08:06:13 GMT-3


Hi,

First question: How can you know that packet is loadbalanced between S0 and
S1?

My suggestion: try to change from 'set interface s0/1/0' to 'set ip next-hop
292.168.242.17'. But, I am sure your config is right.., maybe my suggestion
is working..

inform us your progress,
firebat

----- Original Message -----
From: "Chris Aguillo" <ccaguillo1@hotpop.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Tuesday, May 31, 2005 4:09 PM
Subject: PBR problems - needs help

> Hi,
>
> Basically, I have two active internet connections from my router.
> I have a static route 0.0.0.0 0.0.0.0 via S0 for the general internet. I
> wanted my S1 for internet access for specific ip address coming from the
> LAN and other internet user will be via my S0.
>
> I used PBR to do this but when there is an intended traffic via S1, it is
> sending in load balancing starting in S0 and then S1.
>
> Or am I using the wrong method. My goal is to route all traffic received
> from Gi0/0 to/from Se0/0/0 and Gi0/1 to/from Se0/1/0.
>
> Is there any workaround for this?
>
> Thanks for the help
>
> my config below
>
> interface GigabitEthernet0/0
> description FROM_NET1
> ip address 172.17.17.10 255.255.255.0
> duplex full
>
> interface GigabitEthernet0/1
> description FROM_NET2
> ip address 192.168.5.10 255.255.255.0
> ip access-group 1 in
> ip policy route-map FI-INTERNET
>
> interface Serial0/0/0
> description INTERNET_1
> ip address 222.42.161.74 255.255.255.252
>
> interface Serial0/1/0
> description ITERNET_2
> ip address 292.168.242.18 255.255.255.252
>
> ip classless
> ip route 0.0.0.0 0.0.0.0 222.42.161.73
>
> access-list 1 permit 192.168.5.0 0.0.0.255 log
>
> route-map FI-INTERNET permit 10
> match ip address 1
> set interface Serial0/1/0
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:03 GMT-3