From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu May 26 2005 - 17:59:06 GMT-3
R6#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JK9O3SV-M), Version 12.2(11)T9, RELEASE SOFTWARE
(fc
1)
-----Original Message-----
From: sundar.palaniappan@verizon.com [mailto:sundar.palaniappan@verizon.com]
Sent: Thursday, May 26, 2005 4:50 PM
To: ccie2be; 'Group Study'
Subject: RE: VRRP on sub-interface problem - Never mind
Tim,
What version IOS are you using.
VRRP was first introduced in IOS version 12.0(18)ST.
HTH,
Sundar Palaniappan
"ccie2be"
<ccie2be@nyc.rr.c To: "'Group Study'"
<ccielab@groupstudy.com>
om> cc:
Sent by: Subject: RE: VRRP on
sub-interface problem - Never mind
nobody@groupstudy
.com
05/26/2005 04:25
PM
Please respond to
"ccie2be"
I think this is problem is an IOS version issue.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Thursday, May 26, 2005 4:11 PM
To: Group Study
Subject: VRRP on sub-interface problem
Hi guys,
I'm trying to configure VRRP on a fast ethernet subinterface but it's not
working.
interface FastEthernet1/0/0.136
encapsulation dot1Q 136
ip address 145.7.136.6 255.255.255.0
end
R6(config-subif)#int fa1/0/0.136
R6(config-subif)#vr
R6(config-subif)#vr?
% Unrecognized command
R6(config-subif)#vrrp ip 145.7.136.245
^
% Invalid input detected at '^' marker.
Any ideas why this is and how I should work around this issue?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:02 GMT-3