From: George Cassels (glcassels3@nc.rr.com)
Date: Sun May 22 2005 - 10:52:09 GMT-3
Zeng,
The only other option I could think of would be to Bridge the
interface and use IRB with a BVI interface. Didn't have time to lab it
to verify it though....
George
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie zeng
Sent: Friday, May 20, 2005 9:19 AM
To: Cisco certification
Subject: ATM SVC
Hi:
I have scenario that two routers need to establish the connectivity
through SVC, the ESI address need to be configured on logical
interface,
R1 (10.1.1.1) --------(10.1.1.2) R2
10.1.1.2 should not be configured on any atm interface of R2,
unnumbered ip address and PPP encapsulation is not allowed.
What should I do, greatly appreciated if someone can show some
configurations
Thanks
Zeng
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:00 GMT-3