From: Lanny Ballard (lanny26ga@hotmail.com)
Date: Tue May 17 2005 - 09:08:01 GMT-3
Oh wait,
That's not the way I have mine set up. Don't go buying those NT1s just yet
They go between my U interface and S/T connection on the router.
Man I really need to have my coffee before I post on this board :(
>From: "Lanny Ballard" <lanny26ga@hotmail.com>
>Reply-To: "Lanny Ballard" <lanny26ga@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: RE: Can't get the WIC-1B-U to work with an ISDN Simulator
>(Astricom B-LinkU)
>Date: Tue, 17 May 2005 07:17:08 -0400
>
>Just get a coupld of cheap NT1 and put them between the ST connection on
>your simulator and the U interface on your router. That is the way I have
>mine set up.
>
>NT1s are really cheap.
>HTH
>Lanny
>>From: "Matthew Seppeler" <Matt.Seppeler@InetX.com>
>>Reply-To: "Matthew Seppeler" <Matt.Seppeler@InetX.com>
>>To: "Marvin Greenlee" <marvingreenlee@yahoo.com>, <ccielab@groupstudy.com>
>>Subject: RE: Can't get the WIC-1B-U to work with an ISDN Simulator
>>(Astricom B-LinkU)
>>Date: Mon, 16 May 2005 23:32:35 -0500
>>
>>That would explain it. The Astricom I have only has the ST interfaces. I
>>either need to get another ISDN simulator or find a couple of the ST WIC
>>cards. Thanks!
>>
>> -----Original Message-----
>> From: Marvin Greenlee [mailto:marvingreenlee@yahoo.com]
>> Sent: Mon 5/16/2005 11:10 PM
>> To: Matthew Seppeler; ccielab@groupstudy.com
>> Cc:
>> Subject: Re: Can't get the WIC-1B-U to work with an ISDN Simulator
>>(Astricom B-LinkU)
>>
>>
>>
>> Do you have a Simulator with both S/T and U
>> interfaces? The BRI interface on the 2503 is a S/T.
>>
>> Marvin Greenlee, CCIE #12237
>> Network Learning, Inc.
>>
>> --- Matthew Seppeler <Matt.Seppeler@InetX.com> wrote:
>> > I'm having difficulties trying to get my ISDN
>> > Simulator to work with a WIC-1B-U. The simulator is
>> > an Astricom B-LinkU and one WIC-1B-U is in a 2610
>> > and the other in a 3640. Both routers are on the
>> > Enterprise Basic version of 12.2.(15)T. A show ver
>> > on both routers should the cards as good and lets me
>> > configure them in the IOS.
>> >
>> > The problem lies at layer 1. It should only require
>> > a straight through cable to connect but am getting
>> > no link light. The WIC-1B-U does not require an
>> > external NT1, only the ST version of the card. When
>> > I connect to the simulator I get nothing.
>> >
>> > The simulator works fine as I get link connectivity
>> > when I plug it in to 2503 and get layer 1
>> > connectivity.
>> >
>> > Any help or pointers would be greatly appreciated.
>> >
>> > Matt
>> >
>> >
>> _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>>
>>
>>
>> __________________________________
>> Yahoo! Mail Mobile
>> Take Yahoo! Mail with you! Check email on your mobile phone.
>> http://mobile.yahoo.com/learn/mail
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3