From: Matthew Seppeler (Matt.Seppeler@InetX.com)
Date: Tue May 17 2005 - 01:32:35 GMT-3
That would explain it. The Astricom I have only has the ST interfaces. I either need to get another ISDN simulator or find a couple of the ST WIC cards. Thanks!
-----Original Message-----
From: Marvin Greenlee [mailto:marvingreenlee@yahoo.com]
Sent: Mon 5/16/2005 11:10 PM
To: Matthew Seppeler; ccielab@groupstudy.com
Cc:
Subject: Re: Can't get the WIC-1B-U to work with an ISDN Simulator (Astricom B-LinkU)
Do you have a Simulator with both S/T and U
interfaces? The BRI interface on the 2503 is a S/T.
Marvin Greenlee, CCIE #12237
Network Learning, Inc.
--- Matthew Seppeler <Matt.Seppeler@InetX.com> wrote:
> I'm having difficulties trying to get my ISDN
> Simulator to work with a WIC-1B-U. The simulator is
> an Astricom B-LinkU and one WIC-1B-U is in a 2610
> and the other in a 3640. Both routers are on the
> Enterprise Basic version of 12.2.(15)T. A show ver
> on both routers should the cards as good and lets me
> configure them in the IOS.
>
> The problem lies at layer 1. It should only require
> a straight through cable to connect but am getting
> no link light. The WIC-1B-U does not require an
> external NT1, only the ST version of the card. When
> I connect to the simulator I get nothing.
>
> The simulator works fine as I get link connectivity
> when I plug it in to 2503 and get layer 1
> connectivity.
>
> Any help or pointers would be greatly appreciated.
>
> Matt
>
>
_______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3